XA-XC Falcon IFS (coil-over) front suspension
The XA, XB & XC Falcon coupe's are now six figure cars, and amongst the most sought after cars globally. Handling and braking in stock condition does not match the look of these classics, with an RRS G& coil oversand brake package you can match the great looks with great performance. Street or strip, circuit or cruising the RRS IFS will deliver negative camber gain for greater tyre on track vastly improving your handling.
RRS offer six brake packages for your Falcon, we can also offer Wilwood adaptors, Baer adaptors & Brembo Adaptors.
Please read through the following information and send our friendly sales team an email and we will get back to you with a great price on the highest quality Australian made independent front suspension for your Falcon.
XA XB XC Falcon cOIL-OVERs
Gen7 H.O.2
RRS Falcon coil-over front suspension
- custom geometric correction knuckle
- high load Bearing Hub
- light weight billet top mount
- cold formed chrome silicon wire springs
H.O.2 Wheel options
- 14" rims to a monster 20" rims.
- Standard Ford 5 stud pattern.
The RRS advantage
XA XB XC Falcon bolt on coil-overs 16 years of refinement + height adjustment without loss of suspension travel.
Height Adjustment 3” (7.65cm)
RRS clevis mount and spring platform adjustable mount produce a large range of adjustment – “over & above all other competitive format”!
Custom RRS Stub Axle
RRS strut front end incorporates our custom geometric correction stub axle providing 20% great loading capacity
Camber
The RRS system gives an optimum -½° camber to 2 ¼ ° negative camber at maximum compression or more. The stock suspension gives poor road tyre contact when you need it most in hard turning.
Unsprung weight, Reaction time
Decreases unsprung weight by 3-5kg per side producing quicker reaction time due to superior spring and shock absorber design. This produces full tyre grip to road surface
Dial Adjustable Shock
User friendly 4 point dial adjustment shock allows you to change the shocks rebound & compression settings to go from race track, to high speed touring or cruising in a matter of seconds
H.O.2 BRAKE OPTIONS
- 11.25-inch /287mm Directionally slotted rotors
- Mounting brackets & pads
- Single piston alloy calliper
- Simple to install
- A.D.R. approved braided stainless steel lines
14"RIMS OR BIGGER
- 11.70-inch /297mm Directionally slotted rotors
- Mounting brackets & pads
- Dual piston/2 spot alloy calliper
- Simple to install
- A.D.R. approved braided stainless steel lines
15"RIMS OR BIGGER
- 13-inch /330mm Directionally slotted rotors
- Mounting brackets & pads
- Dual piston/2 red alloy callipers
- Simple to install
- A.D.R. approved braided stainless steel lines
16"RIMS OR BIGGER
- 13" 330mm Directionally slotted rotors
- Mounting brackets & pads
- Cobra 4 piston billet alloy callipers
- Simple to install
- A.D.R. approved braided stainless steel lines
17"RIMS OR BIGGER
- 13-inch /330mm Directionally slotted rotors
- Mounting brackets & pads
- VTTR 6 piston red alloy callipers
- Simple to install
- A.D.R. approved braided stainless steel lines
17"RIMS OR BIGGER
- 13.6-inch /345mm Directionally slotted two piece rotor
- Mounting brackets & pads
- VTTR 6 piston red alloy callipers
- Simple to install
- A.D.R. approved braided stainless steel lines
17"RIMS OR BIGGER
The RRS Advantage
- Increases suspension reaction time
- Custom designed bearing strut rod provides FULL castor adjustment
- Eliminates toe out variations under hard braking
- Easy bolt in Hi impact resistant bearings will reduce friction
The RRS Advantage
- Custom designed for your Falcon
- Full caster adjustment
- Easy bolt in
- High quality urethane bushings
The RRS Advantage:
- Billet Aluminium
- Show quality
- Light weight
- Stronger than OEM
- Urethane bushings
- Precision Machined Ball Joint
- Accurate Mountings
The RRS Advantage:
- New Steel Pressings
- Urethane bushings
- Precision Machined Ball Joint
- Accurate Mountings
- Reinforced to ensure maximum stiffness.
Return to XA XB XC Index Page